General

Home Flooring Tips To Get Great Results

Many people never spend much time thinking about the floors in their homes. They just walk around on them without stopping to consider how useful they are. If you are unhappy with your floors, or if they are just starting to show signs of wear and tear, it may be time to rip them up and replace them with new ones.

Installing new flooring can be a big job, so you need to take the time to plan ahead and prepare. Doing so can mean the difference between a quick job where everything goes smoothly, and a lengthy disaster that ends up costing you far more than you ever expected. Keep these tips in mind when you are looking at new floors.

If you are planning on installing your own floors, you need to know what you are doing. For example, do not just arbitrarily choose the direction in which your floorboards will run. They need to be installed perpendicular to your joists. This way, they will be as strong as possible and any warping will be minimized.

Of course, you need to make sure that your floor is as level as possible to avoid problems. The subfloor needs to be made level before you start putting the floor in place. Otherwise, there can be noisy squeaks and warped floorboards that will end up having to be replaced.

If you are just planning on gluing your floor in place, you may not need to bother with a subfloor. However, if you prefer to nail the floorboards in place, a subfloor is required. This is usually made of plywood and needs to be thick enough to provide a firm anchor for the nails.

To save time and money, you can also choose to use a floating floor. These do not require any nails or glue to stay in place, making them fast and easy to install. They are a great choice for older homes that might have asbestos or other dangerous substances that would otherwise have to be removed before you can proceed.

If you are installing a new floor in a basement or another area with moisture issues, engineered wood floors are a good choice. These floorboards have a top layer of genuine wood that is combined with several layers of fiberboard or plywood. This provides additional protection against dampness without sacrificing the visual appeal of real wood floors.

When you are staining your floors, it is a good idea to test the stain on a small spot that is out of the way and inconspicuous, such as a corner of the room. This way, if there are any issues with the stain, you can find out before you have finished the entire floor.

Installing new floors can be a big job, but the right advice will make it all go more smoothly.  Keep these tips in mind so that you can get your new floors in place with a minimum of time and effort.

(content source)

Show More

Related Articles

Close